It is used in new medium-and high-temperature stationary commercial refrigeration, as well as chiller systems and home appliances. In addition, it can be used to retrofit existing R-12 refrigeration and air conditioning systems. It is also the global standard for new mobile air conditioning and can be used to retrofit existing R-12 mobile air conditioning systems.

ASHRAE No. :R-134a

Replaces:R-12

Applications
Medium-and high-temperature: stationary commercial refrigeration ,chiller equipment, home appliances
Retrofit existing R-12 refrigeration and air conditioning equipment.

Benefits
Broadly used in commercial and stationary applications

Packing
10kg, 25kg, 61kg, 900kg, 18000kg, 22000kg refillable containers/cylinders.
13.6kg, 22.7 kg Disposable cylinders, Iso tanks, Tonners, DOT and Non DOT.
340gms and 500gms Small cans

Lubricant Recommended
POE.

R 404A continues to lead the way as the global industry standard HFC refrigerant for new commercial refrigeration applications. R 404A delivers exceptional capacity and efficiency as an R-502 and R-22 replacement in refrigeration applications and is approved for use by the leading compressor and equipment manufacturers worldwide.

ASHRAE No. ; R-404A

Replaces: R-502

Applications
Commercial refrigeration equipment. New and existing R-502 equipment.

Benefits
Close Match for R-502: Works over the entire R-502 operating range.
OEMs recommend POE oil for optimum reliability.

Lubricant Recommended
POE

Packing
8kg, 17kg, 47kg, 760kg cylinders/Tonners
10.9kg Disposable cylinders ISO Tanks in DOT and Non DOT.

R-123 is an HCFC retrofit
Refrigerant for R-11 in low-pressure centrifugal chillers. New centrifugal equipment design provides excellent energy efficiency. In retrofits of existing centrifugal chillers, systems modifications are often needed to increase capacity or avoid material incompatibility.

Consult with the OEM for specific guidance.

ASHRAE No. R-123

Replaces:R-11

Applications
Low-pressure centrifugal chillers
New centrifugal equipment

Benefits
OEM Acceptance: Endorsed by many major chiller manufacturers.
Low overall operating cost in new equipment.
Proven R-11 replacement in chiller systems worldwide.
Excellent environmental properties: Low ozone depletion.

Lubricants Recommended:
Mineral Oil.

Packing
100 kg drum, 18MT ISO tank

Safety and Handling
Material Safety Data Sheet (MSDS) for R-123
Best Practices for Safe Handling of Refex Refrigerants

Refex 23 is an HFC retrofit refrigerant for R-13 and R-503 in very low temperature applications [below -40°F to -100°F (-40°C to -73°C)] such as medical freezers and environmental chambers. It can be used in new systems as well as to retrofit existing systems.

ASHRAE No. R-23

Replaces: R-13 and R-503

Applications
Very Low Temperature (VLT) [below -40°F to -100°F (-40°C to -73°C)]: medical freezers environmental chambers

Benefits
Can be used where high compressor discharge temperature is not a concern.

Lubricants Recommended:
POE

Packing
9kg, 38kg, 45kg Seamless, high pressure cylinders.

Safety and Handling
Material Safety Data Sheet (MSDS) for Refex 23
Best Practices for Safe Handling of Refex Refrigerants

141b is ideal for spray since it is a liquid at atmospheric conditions and has low vapor thermal conductivity. These properties allow the production of easy to process polyurethane chemicals and the production of polyurethane foam with excellent physical properties.

ASHRAE No. : R-141b

Applications
Refex 141b makes it ideal for the appliance market because of its low vapor thermal conductivity . Refex 141b's low vapor thermal conductivity gives the polyurethane foam insulation the low k-value necessary to achieve the energy consumption requirements. Since Forane 141b is liquid at atmospheric conditions, it allows for easy processing of the polyurethane chemicals. As a liquid, Refex 141b also allows for the polyurethane system to achieve optimum flow which ensures that the foam flow will fill and insulate the entire cabinet.

Refex 141b is also an ideal blowing agent for panel application. Refex 141b has a low vapor thermal conductivity that gives the polyurethane core blown with Refex 141b good insulation value. Additionally, because HCFC 141b is a liquid at atmospheric conditions it allows the foam system to be easily processed and gives good flow properties to the foam. Good flow allows the material to fill the panels uniformly.

Benefits
Has low thermal conductivity to achieve the required energy consumption requirement Is liquid at atmospheric allowing for easy processing allowing for optimum flow of polyurethane Ideal for spray since it is liquid at atmospheric conditions

Packing
235kg, 250kg drums. 18MT Iso tanks.